Development Kits for Bio-module: M001A
A completed Bio-sensor project including software and hardware solutions, to make an all-in-one,including ECG, RESP, GSR ,HR, PPG, HCM, SPO2, BIA and Motion etc.
To provide system solutions and Turnkey projects, reducing customer development time and making an ideal option for health-monitoring, wearable devices.
The evaluation board includes a handheld cases with 4 electrodes, a motherboard with Bluetooth ble chipset, and a module pin-board; and software includes Bluetooth BLE firmware, desktop evaluation tool and mobile APP.
Evaluation board
As shown in the following figure, the evaluation board consists of cases, a Bluetooth motherboard, a pin-board (with bio-module), and a battery.
Sensors
limb electrode
Two pairs of source/drive electrodes are attached to the cases of the evaluation board, which are mounted on two symmetrical left and right handles; As shown in the following side-view figure, they are used to measure body electrical and impedance activities.
PPG sensor
The Bio-module is on-board, the pulse wave (PPG) sensing section contains a pair of red/green/IR led and multi-wavelength photodiode(PD); As shown in the following figure, used for PPG-related applications.
Gsensor
Built-in 14 bits 3-axis Gsensor, range + 2G, + 4G, + 8g, + 16g;
RESOURCES
Bio-sensor–M001A Specs:
https://github.com/feelkit/BIO_SENSOR/raw/master/DOC/M001A/MM001A_Specs_EN.pdfBio-sensor–M001A User’s Manual:
https://github.com/feelkit/BIO_SENSOR/raw/master/DOC/M001A/M001A_UM_EN.pdfBio-sensor–M001A CAD files (scale: 1:1, dxf file type):
Module top layout, Module bottom layout.Evaluation kits for Bio-sensor–M001A:
https://github.com/feelkit/BIO_SENSOR
- FPC Connector[DF37NB-30DS-0.4V]
https://www.hirose.com/product/en/products/DF37/DF37NB-30DS-0.4V%2851%29/
Contact
If you have technical problems and ideas to communicate with us, you can contact us by Email: fanfeiwu@gmail.com, QQ: 4646079
Shopping
Do you want to buy the Evaluation board for Bio-sensor(M001A)?Services for global users: